Aqua Flo High-Efficiency Reverse Osmosis (H.E.R.O.) system
High-Quality Water, Minimal Water Waste
The H.E.R.O. system efficiently collects purified water in a storage tank and recycles rinse water, unlike most systems that waste 4-12 gallons per gallon of RO water.
It flushes the membrane with pure RO water when the tank is full to prevent TDS from passing through during low-pressure periods. The controller then releases pressure, ensuring only high-quality RO water is produced, rejecting up to 99% of TDS.         Â
Spec Sheets
Certifications
Key Features
Heavy duty glass filled polypropylene construction provides double the strength, toughness & durability compared to most other ROs
TFC 75 GPD reverse osmosis membrane provides up to 99% Total Dissolved Solids (TDS) rejection
Pre-filters 10’’ five (5) micron Spun Polypropylene Sediment Cartridge and 10’’ Activated Carbon Cartridge
Quick connect fittings for easy installation
3/8’’ outlet tubing for higher flows
Automatic shut-off valve
An exclusive serviceable check valve that eliminates spring ‘chatter’ noise common in other ROs
Installation Video
Professionally Engineered for Performance
| Model # | Part # | Stage 1 | Stage 2 | Stage 3 | Stage 4 | Storage Tank | Faucet |
|---|---|---|---|---|---|---|---|
| H.E.R.O.â„¢ | 20010075 | Sediment Filter | Activated Carbon Block Filter | Reverse Osmosis Membrane | Activated Carbon Polishing Filter | Plastic Tank - 3.0 Gallons | Chrome - Standard |
| FEED WATER GUIDELINES | |
|---|---|
| Maximum TDS | 2,500 ppm/mg/l |
| Feed Water Pressure | 30 to 70 psi (96–399 kPa) |
| Maximum Hardness | 7 GPG |
| Maximum Iron | 0.2 ppm/mg/l |
| Maximum Manganese | 0.05 ppm/mg/l |
| Maximum Hydrogen Sulphide (H2S) | 0.00 ppm/mg/l |
| Maximum Turbidity | 1.0 NTU |
| Temperature Range | 40° to 100°F (4° to 38°C) |
| pH Range | 3.0 to 11.0 |
| Maximum Chlorine | 2.0 ppm/mg/l |
| Maximum Chloramine | 2.0 ppm/mg/l |