Aqua Flo® Under Sink Filtration Systems
Affordable Alternative to Reverse Osmosis Systems
The Aqua Flo Under Sink Filtration System offers an affordable alternative to reverse osmosis systems, with 3-stage, 2-stage, and single-stage options to address a variety of water issues, including sediment, rust, bad taste, and odor.
This system is efficient and convenient to use. Filters can be easily changed without turning off the water. It uses 100% of the water, eliminating the need for a storage tank and preserving essential nutrients.”
Manuals
Spec Sheets
Warranty
Key Features
Three Stage Ultra Filtration – reduces lead, VOC (pesticides, herbicides, chemicals), THM, chlorine, taste, odor & sediment as small as 0.2 microns.
Dual Stage Sediment / Taste & Odor – removes sediment, bad taste and odor. 5 Micron removal.
Single Stage Sediment – removes suspended sediment that makes water cloudy. 5 Micron removal.
Single Stage Coconut Carbon Block – removes bad taste and odor while filtering out particles as small as 10 microns.
Single Stage Granular Activated Carbon – removes bad taste and odor. Perfect for chlorine reduction on clean municipal water supplies
Professionally Engineered for Performance
| Description | Filter 1 | Filter 2 | Filter 3 |
|---|---|---|---|
| 475QC-3 TRIPLE STAGE ULTRA FILTER | SED | COC | UF |
| 475QC-2 DOUBLE STAGE DUAL FILTER | SED | COC | |
| 475QC-1C SINGLE STAGE COCONUT CARBON FILTER | COC | ||
| 475QC-1S SINGLE STAGE SEDIMENT FILTER | SED | ||
| 475QC-1G SINGLE STAGE GAC FILTER | GAC |
| Description | MICRON | FLOW RATE | CAPACITY (GALLONS) |
|---|---|---|---|
| SEDIMENT FILTER SED-10 BLUE (475 Q SERIES) | 5 | 1 GPM | 900 |
| CARBON FILTER COC-10 PURPLE (475 Q SERIES) | 10 | 1 GPM | 1,500 |
| CARBON FILTER GAC-10 YELLOW (475 Q SERIES) | – | 0.7 GPM | 1,500 |
| ULTRA FILTER UF-10 BLACK (475 Q SERIES) | 0.2 | 0.7 GPM | 1,500 |
| Feed Water Guidelines | |
|---|---|
| Iron (Fe) | <0.2 ppm |
| Manganese (Mn) | <0.05 ppm |
| Hydrogen Sulfide | 0.0 ppm |
| Turbidity | <1.0 NTU |
| Feed Water Pressure | 40-100 psi |
| Temperature | 40-100° F |
| pH Range | 3.0-11.0 |
| Note: Pretreatment suggested if conditions exceed parameters. Must be installed on potable water. | |